Elsist UPS Mission 6000VA/5400W, On-line double conversion, DSP, surge protection, LCD, 10min autonomija

Specifications
- Nominal Power: 6000 VA / 5400 W
- Input: Single-phase
- Nominal Voltage: 220VAC / 230VAC / 240VAC
- Nominal Frequency: 50Hz/60Hz automatic selection
- Voltage Range: 120 - 276Vac
- Frequency Range: 45 - 65Hz
- Bypass Voltage range:
* 220Vac max:default +25% (+10%, +15%, +20%, +25%)
* 230Vac max:default +20% (+10%, +15%, +20%)
* 240Vac max:default +15% (+10%, +15%)

* min:default 45% (-20%, -30%, -45%)
- Bypass Frequency range: +/-1%, +/-2%, +/-4%, +/-5%, +/-10%
- THDi:
* <=3% (100% linear load, input THDV <=1%)
* <=5% (100% non linear load, input THDV <=1%)
- Number of batteries: 16 blocks Standard - 18/20 blocks (configured)
- Type of battery:
* 12V / 7Ah
* Maintenance-free, sealed lead-acid
- Type of recharging: Fast charging or trickle charge automatically
- Recharge time: Fast up to 20h (Max)
- Maximum recharge current: 1A (standard unit)
- Output: Single-phase
- Voltage tolerance: +/-1.0%
- Voltage distortion (THD):
* Less than 2% with 100% linear load
* Less than 5% with100% non linear load
- Nominal Voltage: 220V/230V/ 240Vac selectable
- Frequency regulation:
* +/-0.1% (single unit)
* +/-0.25% (parallel units)
- Frequency:
* When Mains present: UPS takes the same
* In battery mode: 50Hz / 60Hz
- Frequency synchronization:
* 1Hz/s (single unit)
* 0.5Hz/s (parallel units)
- Overload with mains presence:
* 105 % - 110 %,1h max.
* 110% - 125%, 10 min max.
* 125% - 150%, 1 min max.
* >150% switch to bypass
- Overload on bypass:
* Feed the laod for long time if output current is <125%
* Overload on Bypass is limited by the switch on bypass line
- Crest factor: 3:1
- AC efficiency: => 90%
- Dynamic response:
* +/-5.0% (with load 0% to 100%)
* <= 5% in one cycle

- Current limit on inverter output: When istantaneous current is 2 ~ 3 times than nominal peak current (1.414 *nominal power/(3 * 220)) the inverter enter in current limitation mode
- DC component: <= 200 mV
- Switch Time: 0 ms - from Mains to battery, from Inverter to bypass
- Noise: < 55dB (1m)
- Display: LED + LCD
- Insulation resistance: > 2M Ohm (500Vdc)
- Voltage insulation: 2820Vdc, <3.5mA, 1min
- IP protection grade: IP 20

Environmental conditions
- Temperature 0C - 40C (battery excluded)
- Humidity 0 - 95% no condensation
- Altitude: <1500m if >1500m power is reduced

Dimensions / Weight
- Dimensions (H×W×D): 616× 250×502 mm
- Weight: 62 kg